Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #11

Edit by Nick Kessler

Edit approved by Nick Kessler

Before
After
Unchanged

Step Lines

+[title] Installing new Timing Pulleys and Stepper Motors
+[* black] Next Step is installing the new 16tooth Timing Pulleys. Use the photo on the left as a reference on where to tighten down the pulley to the stepper shaft. Use a 2mm Allen Wrench to tighten the set screws. MAKE SURE TO TIGHTEN THE SET SCREW ON THE FLAT OF THE STEPPER SHAFT FIRST.
+[* black] When installing the new Stepper Motors, tighten down the machine screw closest to the endstop switch all the way. Leave the other 3 machine screws slightly loose so the stepper motor can still rock back and forth in the injection molded motor mount.
+[* icon_note] SEE VIDEO IN NEXT STEP FOR REFERENCE

Image 1

No previous image

Added

Image 2

No previous image

Added