Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Nick Kessler

Edit approved by Nick Kessler

Before
After
Unchanged

Step Lines

+[title] Belt Removal
+[* black] The Next step is removing the top belt clamps from the carriages. To do this take a flat head screw driver and wedge it under the Belt Tension Clamp. Once you have the flat under the clamp you want to give it a counter clockwise quarter turn until the clamp pops free of the carriage.
+[* icon_caution] DO NOT REMOVE BOTH BELT CLAMPS FROM THE CARRIAGE. This will make re-installing the belts easier later.
+[* black] Once you have the belt removed from the carriage you can pull the belt from the top until it clears the timing pulley and idler bearings. Now you can let it hang off the back side of the rail for later use.(see 3rd picture)
+[* black] Repeat step for each Tower.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added