Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Nick Kessler

Edit approved by Nick Kessler


Step Lines

[title] Whip/Zip tie Removal
[* black] Next step is removing the Zip ties used to tame your wires and uninstalling the whip.
[* black] After cutting the zip ties, you will need to uninstall the whip. To do this Grab the black plastic Cable Mount Hub on the bottom side of the Laser Cut Plate and turn it counter clockwise until you feel the start to fall through.
[* icon_note] You can remove the entire Cable Mount Hub if you would prefer. To do this, hold the top and bottom of the Hub and turn the plastic nut on the top side of the Laser Cut Plate until it has spun free from the bottom half
+[* icon_caution] KEEP 40MM COOLING FAN FOR LATER USE!