Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by Nick Kessler

Edit approved by Nick Kessler

Before
After
Unchanged

Step Lines

[title] Removing the Top Plate
[* black] The first step is removing the top laser cut panel from your machine. Unscrew the 12, 6-32 1" L screws around the border. Then lift off the top panel exposing your Rambo Board, Steppers, ect.
-[* icon_caution] Be care not to damage your Top plate while removing it. Its best to slowly work your way around the board pulling upwards.
+[* icon_caution] Be careful not to damage your Top plate while removing it. Its best to slowly work your way around the board pulling upwards.
[* black] Remove the 3 black laser cut acrylic pieces by pulling them upwards.
[* icon_note] Be sure you keep all the hardware you remove from the machine in a safe place where you will be able to find when its time to reassemble.