Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #43

Edit by Nick Kessler

Edit approved by Nick Kessler

Before
After
Unchanged

Step Lines

+[title] PTFE installation
+[* black] Insert PTFE here.
+[* black] Exit the PTFE tube just before the y-splitter 3D printed part on the whip.
+[* black] Plug in all three SE300 connectors and slide the 3D printed connector covers in place.
+[* icon_caution] BE SURE YOUR PTFE TUBE IS FULLY SEATED INTO THE HOT END AND SECURED WITH THE LANYARD CLIPS PROVIDED ON BOTH ENDS! FAILING TO DO THIS WILL RESULT IN HOT END JAMS

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added