Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #41

Edit by Nick Kessler

Edit approved by Nick Kessler

Before
After
Unchanged

Step Lines

+[title] Installing Springs/Arms/SE300 Hot End
+[* black] Start by attaching the arms to the Carriage Ball Joints and then install the springs into the arms. Repeat this on all 3 towers.
+[* black] Now you can install the SE300 Hot End onto the arms in the orientation featured in the photo attached.
+[* icon_caution] BE CAREFUL NOT TO STRETCH THE SPRINGS TOO FAR!
+[* icon_note] If it makes it easier you can install the bottom springs after attaching the Arms to the Hot End Ball Joints.

Image 1

No previous image

Added

Image 2

No previous image

Added