Skip to main content

Changes to Step #23

Edit by geneb

Edit approved by geneb

Before
After
Unchanged

Step Lines

[title] Installing the Layer Fans, Continued.
[* black] Finish routing the left fan's wire by running it under the clip next to it (blue arrow) and then fold the lead under the effector (red circle).
-[* black] Perform these tasks for the other two fans.
+[* black] Tighten down the two screws that capture the fan lead you're working with. Take special care not to crush the fan wire under the clip - make sure it is routed under the clip arch itself.
+[* black] Perform these tasks for the two remaining fans.