Skip to main content

Changes to Step #20

Edit by geneb

Edit approved by geneb

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[title] Attaching the Layer Fan Mounts
+[* black] For this task, you'll need the three layer fan mounting brackets, the assembled effector platform, and six #4, 3/8" screws
+[* black] Fix each fan bracket in place using two #4, 3/8" screws for each one. ***DO NOT TIGHTEN*** . The screws will be tightened down in a later step.
+[* icon_caution] Pay close attention to how the fan brackets are oriented. They should be installed exactly as shown in the last image.