Skip to main content

Changes to Step #16

Edit by geneb

Edit approved by geneb

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[title] Installing the HE280 PCB Mount
+[* black] For this task, you'll need the assembled hot end, the HE280 PCB Mount, 3 #4, 1/2" screws, 1 Barrel Fan Blocker, and 1 25mm fan.
+[* black] Insert the hot end assembly into the HE280 PCB Mount so that the tab with "SeeMeCNC" on it is aligned with the cooling fan retaining clips (identified by the red arrows).
+[* black] Install the cooling fan into the retaining clips, under the HE280 PCB. The fan blades should face away from the hot end, as shown.
+[* black] Make sure that the power lead for the fan is in the upper right corner of the fan as indicated by the blue arrow.

Image 1

Old Version

New Version

Image 3

Old Version

New Version