Changes to Step #6
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Disassemble Hotend Body |
|---|---|
| [* icon_note] The main body of the hotend will come finger tight. Do not use this as assembled. | |
| [* black] First remove the nozzle (should only be on finger tight when taken from the kit). Then unscrew the heater block. Finally unscrew the heat break. You should have 4 seperate pieces. | |
| [* black] You should have the body disassembled as shown in Pic 2. |