Skip to main content

Changes to Step #4

Edit by Andy Oprisko

Edit approved by Andy Oprisko


Step Lines

-[title] Wiring the Heater Cartridge
+[title] Attach Wires to Cartridge
[* black] Locate the two red insulated wires in the kit and strip off the ends as shown in the first picture approximately as long as half the crimp. 7 mm works fine.
[* black] Insert the wires into the crimps and as in the step before use your crimp tool or pliers to crush the other half of the crimp attaching the wires to the crimp securely.