Changes to Step #2
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| - | [title] |
|---|---|
| + | [title] Prep Heater Cartridge |
| [* black] For this task you'll need the heater cartridge and crimps included in the kit. | |
| [* black] Cut the legs of the heating cartridge to 11 mm. | |
| [* black] Bend one leg of the cartridge 90 degrees away from the other leg. This will seperate them giving room to attach the crimp terminals. |