Skip to main content

Changes to Step #2

Edit by geneb

Edit approved by geneb

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[title] Installing the Heater Cartridge
+[* black] For this task you'll need the heater block and the heater cartridge.
+[* black] Insert the heater cartridge as shown, paying special attention to the orientation of the heater block and the position of the cartridge. Use your Philips screwdriver to tighten the screw on the bottom face of the heater block to lock the cartridge in place.
+[* black] Remove the two PTFE insulating tubes from the cartridge power leads.