Skip to main content

Changes to Step #1

Edit by geneb

Edit approved by geneb


Step Lines

-[* black] Insert wisdom here.
+[title] Attach Thermistor Connector
+[* black] This step requires the Rev6 HE280 probe board and a JST connector, as shown in the far left image.
+[* black] You'll need to flip the board upside down and locate the position marked "TEMP". This is the position where you'll be soldering the JST connector.
+[* black] Insert the JST connector into the board with it's notch facing the printed notch on the PCB. Solder in place.

Image 2

Old Version

New Version