Changes to Step #40
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| [title] Whip Wires | |
| [* black] You will need to install KK connector housings on the whip wires first. Be sure that the whip is already fed through the cable mount hub! | |
| [* icon_caution] When inserting the wires in the white Molex KK connectors, make sure you're using the connectors we sent you in the kit, NOT the ones included in the Duet box! | |
| [* black] LED: Green Wire - 2 pin KK connector - PIN 2 | |
| - | [* black] HE FAN: |
| + | [* black] HE FAN: Purple Wire - 2 pin KK connector - PIN 2 |
| [* black] LAYER FAN: Orange Wire - 2 pin KK connector - PIN 2 | |
| [* black] PROBE: Red PIN 1, Blue PIN 2, Black PIN 3, White Wire PIN 4 - 4 pin KK connector | |
| [* black] E0 TEMP: 2 White Wires - 2 pin KK connector - PINS 1 & 2 (Polarity DOES NOT matter) |