Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #40

Edit by Caleb Fairres

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

[title] Whip Wires
[* black] You will need to install KK connector housings on the whip wires first. Be sure that the whip is already fed through the cable mount hub!
+[* icon_caution] When inserting the wires in the white Molex KK connectors, make sure you're using the connectors we sent you in the kit, NOT the ones included in the Duet box!
[* black] LED: Green Wire - 2 pin KK connector - PIN 2
[* black] HE FAN: Orange Wire - 2 pin KK connector - PIN 2
[* black] LAYER FAN: Orange Wire - 2 pin KK connector - PIN 2
[* black] PROBE: Red PIN 1, Blue PIN 2, Black PIN 3, White Wire PIN 4 - 4 pin KK connector
[* black] E0 TEMP: 2 White Wires - 2 pin KK connector - PINS 1 & 2 (Polarity DOES NOT matter)