Changes to Step #40

Edit by SeeMeCNC —

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[title] Whip Wires
+[* black] You will need to install KK connector housings on the whip wires first. Be sure that the whip is already fed through the cable mount hub!
+[* black] LED: Green Wire - 2 pin KK connector - PIN 2
+[* black] HE FAN: Orange Wire - 2 pin KK connector - PIN 2
+[* black] LAYER FAN: Orange Wire - 2 pin KK connector - PIN 2
+[* black] PROBE: Red PIN 1, Blue PIN 2, Black PIN 3, White Wire PIN 4 - 4 pin KK connector
+[* black] E0 TEMP: 2 White Wires - 2 pin KK connector - PINS 1 & 2 (Polarity DOES NOT matter)

Image 1

Old Version

New Version

Image 2

No previous image

Added