Changes to Step #36
Step Lines
[title] Whip and Strain Relief Installation | |
- | [* black] The Cable Mount Hub (Strain Relief) gets installed in a hole in the top base plate. |
- | [* black] After installation, you will feed the hot end whip up from the bottom through the strain relief. Do not tighten at this time. |
+ | [* black] The Cable Mount Hub (Strain Relief) gets installed in a hole in the top base plate. There are (2) parts, the hub and the nut to secure it. |
+ | [* black] After installation, you will feed the hot end whip (end without connectors) up from the bottom through the strain relief. Do not tighten at this time. |
Image 1
Old Version
New Version
Image 2
No previous image
Added