Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #25

Edit by Caleb Fairres

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

[title] Installing Carriages
+[* black] You will need to assemble the three carriages for this step. Please open this link to the guide in a new window, and return here when you're finished: [guide|59]
[* black] We will now install the injection molded carriages on the three towers. They will install on the towers with the ball joints facing the inside.
[* black] To install the carriages pass the wires from the top of the TSLOT through the center of the carriage.
[* icon_caution] Pushing the carriage down too hard too fast can damage the bearing covers on the carriages. Please perform this operation slowly and carefully.
[* black] Lower the carriage down to the top of the TSLOT and then slowly push it down onto the TSLOT.