Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #24

Edit by Caleb Fairres

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

[title] Wiring Connections
[* black] Locate the yellow ring terminals
[* black] You will crimp a yellow ring terminal on the red 12awg wire from the Z tower, and the black 12awg wire from the X tower.
[* black] These two wires should then be routed through the base to the power supply.
-[* black] They will connect to the vacant V+ (red wire) and the V- (black wire) terminals on the power supply using the screws provided with the power supply.
-[* black] Locate the shorter length of 12awg red wire from your kit. Crimp the final yellow ring terminal on one end of this wire. It will connect to the only available V+ location on the power supply.
+[* black] They will connect to vacant V+ (red wire) and the V- (black wire) terminals on the power supply using the screws provided with the power supply.
+[* black] Locate the shorter length of 12awg red wire from your kit. Crimp the final yellow ring terminal on one end of this wire. It will connect to the V+ location indicated in the photo on the power supply.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version