Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #21

Edit by SeeMeCNC

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[title] Stuffing Wires in Towers
+[* black] Locate the (3) pieces of T-Slot, (2) white 26awg thermistor wires, and long (3) 12awg red/black wires.
+[* black] Label the towers X Y & Z
+[* black] The Z tower will get the red 12awg wire fed down the center hole.
+[* black] The Y tower will get a black 12awg wire fed down the center hole.
+[* black] The X tower will get the two thermistor wires and a black 12awg wire fed down the center hole. On this tower it is easiest to feed the thermistor wires first and then chase them with the 12awg black wire.