Skip to main content

Changes to Step #57

Edit by SeeMeCNC

Edit approved by SeeMeCNC


Step Lines

-[* black] Insert wisdom here.
+[title] Secure the Power Panel
+[* black] The power panel is secured to the injection molded side using (2) 10/32 x 5/8" screws as shown.
+[* black] The injection molded side panel is NOT tapped. You will be tapping the hole with the screws as you secure the plate.
+[* icon_caution] When aligning the plate, be sure to NOT pinch any wires between the plate and any other components.