Changes to Step #54
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| - | [title] Install |
|---|---|
| + | [title] Install 40mm Fan |
| [* black] The fan should be installed so that it will blow OUT through the panel. (The foil sticker is should be facing towards the laser cut panel) | |
| [* black] It is attached to the laser cut plate using (2) M3 22mm socket head bolts, (2) rubber o-rings, and (2) nylon lock nuts. | |
| [* black] The o-ring is installed between the fan and the laser cut plate. |