Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #54

Edit by SeeMeCNC

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

-[title] Installing 60mm Fan
+[title] Install 60mm Fan
[* black] The fan should be installed so that it will blow OUT through the panel.
[* black] It is attached to the laser cut plate using (2) 6-32 x 1.75" screws, (2) rubber o-rings, and (2) nylon lock nuts.
[* black] The o-ring is installed between the fan and the laser cut plate.