Skip to main content

Changes to Step #19

Edit by SeeMeCNC

Edit approved by SeeMeCNC


Step Lines

-[* black] Insert wisdom here.
+[title] Installing Base Top Plate
+[* black] You are now ready to install the base top plate on the base assembly.
+[* black] Start in one area and align the tabs in the injection molded components with the cutouts in the laser cut plate. When aligned press down and continue to work your way around the plate until it is fully seated on the injection molded components.
+[* black] Finish by securing the plate with (12) 6-32 x 1" screws. Fully tighten these screws.