Skip to main content

Changes to Step #14

Edit by SeeMeCNC

Edit approved by SeeMeCNC


Step Lines

[title] Solder End-Stop Wires
[* black] Locate the bag of black 26awg wires. These are your end-stop wires.
+[* black] One end of each wire is terminated with a KK style terminal. You will solder the other end to the end-stop.
[* black] 2 wires will be soldered to each end-stop switch. Solder the wires to the outer two legs (nothing gets soldered to the middle leg).
+[* icon_note] For those wondering why soldering the end-stop wires was not completed previous to installing the end-stops, it is merely a personal preference. Having them installed on the motor mounts gives the assembly some mass, so they don't move around when soldering.