Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by SeeMeCNC

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

[title] Installing the PSU on the Base Plate
-[* black] Insert wisdom here.
+[* black] The PSU assembly installs into the base plate with (2) 6-32 x 1" screws. These screws will go into the nylon lock nuts you installed in the previous step.
+[* black] The blocker panels will slide down into rectangular cuts in the base panel and then the whole assembly will slide and lock into place. You should then secure it with the (2) screws referenced above.