Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #20

Edit by SeeMeCNC

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

[title] Installing Bed Insulator Clips
[* black] Insert stainless steel nylon lock-nuts into the side with circular marks.
-[* black] Using 6-32 x 1" phillips pan head machine screws, gently tighten as shown. Blue bed clamps should rotate very easily, but not be loose.
-[* black] You will be installing 6 bed clamps and support blocks around the periphery of the hole in the center of the laser cut plate.
+[* black] Using 6-32 x 1" phillips pan head machine screws, gently tighten as shown. The bed clamps should rotate easily, but not be loose.
+[* black] You will be installing 3 bed clamps and support blocks around the periphery of the hole in the center of the laser cut plate.