Changes to Step #20
Step Lines
| + | [title] Installing Bed Insulator Clips |
|---|---|
| + | [* black] Insert stainless steel nylon lock-nuts into the side with circular marks. |
| + | [* black] Using 6-32 x 1" phillips pan head machine screws, gently tighten as shown. Blue bed clamps should rotate very easily, but not be loose. |
| + | [* black] You will be installing 6 bed clamps and support blocks around the periphery of the hole in the center of the laser cut plate. |
Image 1
No previous image
Added
Image 2
No previous image
Added