| [* black] Insert the 6-32 nylon lock nuts into the injection molded parts first. There will be 2 of these nuts inserted per injection molded piece. |
---|
| [* black] Then install the 1/4-20 button head screws and T-SLOT nuts. Remember to only get the nut started on the screw. |
---|
| [* black] Press the bearing / cover assembly (pre-assembled by SeeMeCNC) onto the posts inline with the 1/4-20 hardware (position shown). |
---|
| [* black] The two halves will be fastened together with #4 x 1/2"screws. |
---|
| [* black] Complete 3 identical assemblies. |
---|