Skip to main content

Changes to Step #9

Edit by SeeMeCNC

Edit approved by SeeMeCNC


Step Lines

+[title] Base Tower Supports Overview
+[* black] You'll be making three of these assemblies using injection molded parts 84407 & 84408 ( 1 each per assembly).
+[* black] When inserting the nylon lock nuts, do so from the "inside" of the injection molded part. This will allow the nut to fit more easily into the nut pocket. Needle nose pliers make this a breeze.
+[* black] Only thread the t-slot nuts on a few threads - you need to leave room for the tower channel to slide between the t-slot nut and the face of the injection molded mount.
+[* black] The threads on the blind nuts have a flange on one side. The flanged side should be away from the head of the screw.


Video Added