Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #37

Edit by SeeMeCNC

Edit approved by SeeMeCNC


Step Lines

+[title] Installing the Bowden Tube
+[* black] Slide a retainer clip onto the Bowden tube (Closed end)
+[* black] Slide the Bowden tube into the EZR Struder. The Bowden tube will fit nearly the entire length of the hot end, so make sure it's fully seated.
+[* black] Insert the locking clip between the face of the push-fit connector and it's plastic release ring.
+[* black] After installing the retaining clip, firmly grip both the Bowden tube and push up to ensure that the tube is fully seated. The locking mechanism will allow the tube to slip in this direction.

Image 1

No previous image