Changes to Step #32

Edit by Josh Heiner —

Edit approved by Josh Heiner

Before
After
Unchanged

Step Lines

[title] Install Top Assembly Top Plate
-[* black] Align the top assembly top plate with the top of the printer. You will want to work your way around the pressing the top plate down onto the tabs of the injection molded components. The is a process of finesse, nut brute strength. Work your way around the top of the machine one set of tabs at a time getting them pressed into the top plate.
+[* black] Align the top assembly top plate with the top of the printer. Work your way around the periphery of the top plate while pressing it down onto each set of injection molded tabs. This is a process of finesse, not brute strength. When complete, the top plate should be resting flush against the injection molded parts in the area of each axis.
[* black] When the plate is set on all tabs you will install 6-32 x 1" screws in all 12 locations. You can fully tighten these screws.
[* black] Install the top electronics cover when you have completed.