Changes to Step #32

Edit by SeeMeCNC

Edit approved by SeeMeCNC


Step Lines

-[* black] H
+[title] Install Top Assembly Top Plate
+[* black] Align the top assembly top plate with the top of the printer. You will want to work your way around the pressing the top plate down onto the tabs of the injection molded components. The is a process of finesse, nut brute strength. Work your way around the top of the machine one set of tabs at a time getting them pressed into the top plate.
+[* black] When the plate is set on all tabs you will install 6-32 x 1" screws in all 12 locations. You can fully tighten these screws.
+[* black] Install the top electronics cover when you have completed.