Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by SeeMeCNC

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

[title] Solder Thermistor
-[* black] Separate the legs of the thermistor as shown and solder them to the top two pads on the heated bed.
+[* black] Separate the legs of the thermistor as shown and insert the glass bead of the thermistor into the hole in the center of the heated bed. Solder them to the top two pads on the heated bed.
[* black] You can cut the excess leads after you have soldered it to the bed.