Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #22

Edit by SeeMeCNC

Edit approved by SeeMeCNC


Step Lines

-[* black] H
+[title] Install Side Plate
+[* black] Insert 6-32 nylon lock nuts into the nut traps on the injection molded base sides.
+[* black] Install the first base side between the X & Z towers.
+[* black] Secure the base side with (2) 6-32 x 1" screws.
+[* black] Fasten the EZR Struder side plate to the base side plate using (2) 10-32 socket head cap screws. The holes in the injection molded side panels are not tapped / threaded. Make sure you put some pressure on the screws and keep them straight.