Changes to Step #17

Edit by SeeMeCNC

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

-[* black] G
+[title] Routing Belts
+[* black] Routing the belts is best completed by laying the machine down on its side.
+[* black] Begin by routing the belt through the top side of the carriage as shown in the first image.
+[* black] Install a belt clip. The two wider stanced legs will insert into the carriage first and then the belt clip can be pressed down to lock into place. If it is not wanting to lock, you may need to apply inward pressure on the closer stanced legs while pushing down to lock it in place.

Image 2

Old Version

New Version

Image 3

Old Version

New Version