Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by SeeMeCNC

Edit approved by SeeMeCNC


Step Lines

-[* black] H
+[title] Installing Top Assembly
+[* black] Next we will be installing the top assembly on the printer. It is most helpful if you can get assistance from someone, but this can be completed by yourself.
+[* black] Orient the top assembly correctly with the base assembly (XYZ)
+[* black] Route the towers from X Y Z up through the laser cut base of the top assembly.
+[* black] Align the cutouts for the extrusion in the laser cut platewith the actual extrusions. You should not push the top assembly down any farther yet.

Image 2