Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by SeeMeCNC

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

[title] Install the Carriages
-[* black] Since you have built the carriages already you can now simply install them on the printer.
+[* black] Since the carriages are now fully prepared, you can now install them on the printer.
[* black] Align one of the carriages with the top of the TSLOT (ball joints facing inside the print area) and gently move it down until all four bearings are engaged by the TSLOT. Roll the carriage to the bottom of the extrusion and let it sit against the top base plate.
[* black] Repeat for the other two carriages.