Changes to Step #6

Edit by SeeMeCNC

Edit approved by SeeMeCNC


Step Lines

[title] PSU Hookup
-[* icon_caution] CAUTION: DO NOT rely on the images here for correct placement of the power switch wires. They are incorrect and the images will be corrected soon. Refer to these images only for connection of the extrusion tower wires.
[* black] Crimp a yellow ring terminal onto both the black and red wires on the ends that exit the bottom of the Y and Z towers.
[* black] Route them under the large arc of the PSU blocker and attach them to the power supply. The locations are indicated by arrows in the image.