Changes to Step #6

Edit by Matthew Connor

Edit approved by Matthew Connor

Before
After
Unchanged

Step Lines

[title] PSU Hookup
-[* black] Crimp a yellow ring terminal onto the 12 awg wires from the Y and Z towers.
+[* icon_caution] CAUTION: DO NOT rely on the images here for correct placement of the power switch wires. They are incorrect and the images will be corrected soon. Refer to these images only for connection of the extrusion tower wires.
+[* black] Crimp a yellow ring terminal onto both the black and red wires on the ends that exit the bottom of the Y and Z towers.
[* black] Route them under the large arc of the PSU blocker and attach them to the power supply. The locations are indicated by arrows in the image.