Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by SeeMeCNC

Edit approved by SeeMeCNC


Step Lines

-[* black] H
+[title] Installing End Stop Wires
+[* black] The end stop wires are located in the RAMBo box. They are the black and white wires pre terminated with a blade connector one end and a metal latching connector on the other end. There should be 6 total end stop wires.
+[* black] Begin with the Z tower location and install a pair of end stop wires on the end stop as shown.
+[* black] After installing the wires, bend the end stop over as shown.
+[* black] Route the two wires through the Idler Plate as shown.

Image 3

Old Version

New Version