Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by SeeMeCNC

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

[title] Install Motor Mount Assembly
-[* black] Install the (3) motor mounts on the Top Base Plate using (1) 6-32 x 1" screw per motor mount. You can fully tighten these screws. Note the orientation of the Top Base Plate. There is laser engraved text on this plate noting which side should be DOWN)
+[* black] Install the (3) motor mounts on the Top Base Plate using (1) 6-32 x 1" screw per motor mount. Do not fully tighten these screws. Note the orientation of the Top Base Plate. There is laser engraved text on this plate noting which side should be DOWN)