Changes to Step #5
Step Lines
| + | [title] Running the Print from the SD Card |
|---|---|
| + | [* black] All SeeMeCNC Printers utilize the same LCD screen. The SD card is inserted on the left-hand side of the controller. When inserting the SD card, the gold contacts should be facing towards you (as shown in the first image). |
| + | [* black] Once you have inserted the SD card into the SD card reader the printer will automatically recognize its presence and show you a list of all the files on the card. |
| + | [* black] You can use the encoder to navigate to and select the file that you wish to print. |
| + | [* black] Once you have selected a print file, the print will not begin until the target temperatures have been reached. NOTE: Some slicing engines heat both bed and hot end at the same time, other heat the bed first and then the hot end. |
| + | [* icon_note] Only .GCODE files can be printed from the SD card. You can not send .STL files directly to the printer. They must be processed through a slicing engine first. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added