Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by geneb

Edit approved by geneb


Step Lines

[title] Configure the Arduino IDE
[* black] Start the Arduino IDE
[* black] Select the "Tools" menu and scroll down to the "Boards" item. Select the entry marked "Arduino/Genuino Mega or Mega 2560".
[* black] Next, click on the "Tools" item again, and pick "Port". Select the COM port that the Rambo appears as. (This is shown under the Ports node in your Device Manager!)
+[* black] [|Here is a short video that shows the steps involved with uploading the firmware to the RAMBo.]