Changes to Step #29
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [title] Making the I2C Wiring Connections |
| + | [* black] Match red with red and black with black for the I2C (wires that are in the 4 pin latching housing in thebase of machine, and red / black wires from the new hotend whip) |
| + | [* black] Slide a piece of 15mm long heat-shrink tubing over one of the red wires and one of the black wires. |
| + | [* black] Perform an in-line splice of the wires. Red to red, black to black. |