Skip to main content

Changes to Step #24

Edit by SeeMeCNC

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[title] Thermistor Lead Connections
+[* black] Notice in the first picture that the lead has been marked. (labeled with a blue arrow). This lead will be soldered to the green wire from the new hotend whip.
+[* black] Slide a piece of 15mm long heat-shrink tubing over one of the wires.
+[* black] Slide another piece of 15mm long heat-shrink tubing over one of the wires from the second pair of thermistor leads.

Image 1

Old Version

New Version