Skip to main content

Changes to Step #8

Edit by SeeMeCNC

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[title] Soldering the first Connection
+[* black] Cut a piece of heat-shrink at 15mm. (This was included with the hot end whip)
+[* black] Slide the 15mm long heat-shrink tubing over the blue wire.
+[* black] Perform an in-line splice of the blue wire and the wire that was previously in the Fan 0 + terminal.
+[* black] Solder the connection.