Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by SeeMeCNC

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

-[* black] H
+[title] Installing the Hobbed Drive Roller
+[* black] Locate the Hobbed Drive Roller and the included Allen Wrench.
+[* black] Slide the hobbed drive roller onto the stepper motor shaft. Note the orientation of the hobbed drive roller shown in the second image.
+[* black] Press the red release lever and slide the hobbed drive roller down into the EZR Struder assembly until the midpoint of the hobbed portion is aligned with the split between the base and cover pieces (indicated by a green arrow)
+[* black] Rotate the stepper motor shaft so the flat is in the orientation indicated by the blue arrow.
+[* black] Align the hobbed drive roller so that the set screw will be set against the flat in the stepper motor shaft.

Image 2

Old Version

New Version

Image 3

Old Version

New Version