Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by SeeMeCNC

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] Use the remaining 6-32 x 1" Phillips Pan Head Screw to attach the base to your current assembly.
+[* black] You can now fully tighten all screws in the assembly.
+ [* black] NOTE: The two screws that act as a pivot point should not be so tight as to prevent the Mirror Mount Assembly top section from pivoting about the bottom section.
+[* black] Set the entire sub-assembly and remaining parts from this sub-assembly aside for installation later in the build.